Iron Doors Plus manufactures the Metro Steel Architectural Doors & Windows. This series is known for its clean European lines and minimalist quality. We can supply your architectural needs for new construction or remodel. With our in house CAD department we can provide the right design for your next project.

  • High-end maintenance free hinges
  • Artistic removable steel stops for glass installation and/or replacement
  • Our hot steel muntin and crossbars have a narrow profile and and provide the minimal style and design.
  • Metro Steel doors & windows are designed for double pane or single pane glass.
  • We use the finest quality primers and paints with a baked on finish and zinc coated steel.

Metro Steel products arrive at the job site ready for installation, as opposed to normal requirements of onsite glass installation and putty glazing. Click here for warranty information.

Metro Steel Gallery


Diagram 1 – Diagram 2 – Diagram 3 – Diagram 4


The Metro Line was designed to be very energy efficient. All of our steel beams which include our Jambs , stiles & rails are insulated to reduce the flow of thermal energy from outside to inside .The metro line uses the best performing Low E Glass on the market. Most of the Suns energy is either reflected back or absorbed by the low E glass. The Double Pane Low E Insulated Glass in the Metro Line meets or exceed all Federal and State performance codes. All METRO STEEL PRODUCTS incorporate a thermal break . The glazing tape or caulk used ( Dow Corning 795 Silicone Building Sealant used between our glass and glass stops helps reduce the flow of thermal Energy.

Also available in Laminated Glass, Tinted Glass & Bronze Reflective.



All Metro Steel products are fabricated using 100% recycled hot rolled steel that is cleansed by shot blasting than dipped in zinc. All divided lites are manufactured using  1 3/8”T-Bar Hot Rolled Steel. Metro Steel muntin material are designed for single or double pane glass applications.


All METRO STEEL products us use Q-Lon Door seals made of an open-cell urethane foam core and clad in an embossed polyethylene, U.V. stabilized, paint resistant line for kerf applications. All other parameter gasketing is made of an open-cell urethane foam core and clad in an embossed polyethylene, U.V. stabilized, paint  resistant line.


  • 1 3/8” wide true muntin divider
  • Custom Steel Glazing Bead
  • Glazing range 1/4” to 5/8”
  • Baked on Paint Finish
  • Double weather-stripping